Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
You need advice while restoring your Magnette or it makes unknown noises since the last outing? And you haven't found the answer on our tech-website? Ask the experts around the world!
  • Page:
  • 1

TOPIC: Plenum

Plenum 8 years 3 months ago #1005

  • wills
  • wills's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 9
  • Karma: 0
Plenum now removed along with large amount of skin from back of hand.
with fitting of pancakes how can I secure choke cable? Shall I have to make a special bracket? any pictures of a bracket with pancakes?
Regards
The administrator has disabled public write access.

Plenum 8 years 3 months ago #1004

  • wills
  • wills's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 9
  • Karma: 0
Many thanks for the reply, I have removed three of the bolts but am having difficulty with the last, my hand is to large to get between the wing and plenum. Have considered smashing it with big hammer and fitting pancakes.
the reason for removing it is that the carbs are seriously out of tune and the choke is sticking.
regards
The administrator has disabled public write access.

Plenum 8 years 3 months ago #1003

  • C.S.J.
  • C.S.J.'s Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 48
  • Thank you received: 1
  • Karma: 1
Should be 4 fixings (two on each carb)that you undo and remove, from the engine side of the outer carb flanges (that fix the carbs to the plenum.
The administrator has disabled public write access.

Plenum 8 years 4 months ago #999

  • wills
  • wills's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 9
  • Karma: 0
Please any tips in removing plenum in situ from the carbs.
thanks anticpationn
Wills
The administrator has disabled public write access.
  • Page:
  • 1
Time to create page: 0.086 seconds