Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
You need advice while restoring your Magnette or it makes unknown noises since the last outing? And you haven't found the answer on our tech-website? Ask the experts around the world!
  • Page:
  • 1

TOPIC: Rear hub removal

Rear hub removal 10 years 10 months ago #526

  • Murray
  • Murray's Avatar
  • OFFLINE
  • Junior Boarder
  • Posts: 37
  • Thank you received: 1
  • Karma: 1
Trevor, thank you, that is a really nice offer and one I shall take you up on as soon as I have time to do the job. Just fitting the rear belts now, finished the front ones. Got a 1800, 3 brg engine on the way and a 5 speed kit ready here, it's going to be a busy winter!
Thanks again, I shall be in touch later.
Murray
The administrator has disabled public write access.

Rear hub removal 10 years 10 months ago #524

  • JONES21
  • JONES21's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 110
  • Thank you received: 11
  • Karma: 0
Murray
If you remove the half shaft, remove the 8 sided nut you need a special spanner to remove this, a normal spanner will not fit, I do have one , if you want to borrow it, if you cover the postage and leave a deposit.
With the nut removed if you then can use the halfshaft backwards and a large socket, put 2 of the wheel nuts on the studs and gently do the huts up and the bearing housing will come off.
Trevor
The administrator has disabled public write access.

Rear hub removal 10 years 10 months ago #523

  • Murray
  • Murray's Avatar
  • OFFLINE
  • Junior Boarder
  • Posts: 37
  • Thank you received: 1
  • Karma: 1
I am going to be replacing the rear oil seals on the back axle. I do not have the special tools supposedly required for hub removal.
How have you managed to remove said hub and is there anything I need to look out for in case of damage or anything else.
Thanks
Murray
The administrator has disabled public write access.
  • Page:
  • 1
Time to create page: 0.124 seconds